New 200-301 CCNA Exam Questions - Cisco Certified Network Associate

200-301 Cisco Certified Network Associate is the only exam for Cisco CCNA Certification. To help you pass your CCNA 200-301 exam, PassQuestion offers you New 200-301 CCNA Exam Questions to practice, it will make you feel easy to pass your Cicso 200-301 exam.After you pass 200-301 CCNA, you earn CCNA certification.

The Only One Exam 200-301 CCNA To Get Your CCNA Certification

Achieving CCNA certification is the first step in preparing for a career in IT technologies. To earn CCNA certification, you pass one exam that covers a broad range of fundamentals for IT careers, based on the latest networking technologies, software development skills, and job roles.Cisco Certified Network Associate v1.0 (CCNA 200-301) exam is a 120-minute exam associated with the CCNA certification.There are no formal prerequisites for CCNA certification, but you should have an understanding of the exam topics before taking the exam.

CCNA candidates often also have:

One or more years of experience implementing and administering Cisco solutions
Knowledge of basic IP addressing
A good understanding of network fundamentals

This Exam Tests Your Knowledge And Skills Related To:

Network fundamentals
Network access
IP connectivity
IP services
Security fundamentals
Automation and programmability

View 200-301 CCNA Online Free Questions From PassQuestion Full 200-301 Real Exam Questions

1.Refer to the exhibit.
 
Which type of route does R1 use to reach host 10.10.13.10/32?
A. default route
B. network route
C. host route
D. floating static route
Answer: B

2.Refer to the exhibit.
 
Which prefix does Router1 use to Host A?
A. 10.10.10.0/28
B. 10.10.13.0/25
C. 10.10.13.144/28
D. 10.10.13.208/29
Answer: B

3.A frame that enters a switch fails the Frame Check Sequence.
Which two interface counters are incremented? (Choose two.)
A. input errors
B. frame
C. giants
D. CRC
E. runts
Answer: AD

4.How do TCP and UDP differ in the way that they establish a connection between two endpoints?
A. TCP uses the three-way handshake, and UDP does not guarantee message delivery.
B. TCP uses synchronization packets, and UDP uses acknowledgement packets.
C. UDP provides reliable message transfer, and TCP is a connectionless protocol.
D. UDP uses SYN, SYN ACK, and FIN bits in the frame header while TCP uses SYN, SYN ACK, and ACK bits.
Answer: A

5.Which 802.11 frame type is association response?
A. management
B. protected frame
C. action
D. control
Answer: A

6.In which way does a spine-and-leaf architecture allow for scalability in a network when additional access ports are required?
A. A spine switch and a leaf switch can be added with redundant connections between them.
B. A spine switch can be added with at least 40 GB uplinks.
C. A leaf switch can be added with connections to every spine switch.
D. A leaf switch can be added with a single connection to a core spine switch.
Answer: C

7.Which statement identifies the functionality of virtual machines?
A. The hypervisor communicates on Layer 3 without the need for additional resources.
B. Each hypervisor can support a single virtual machine and a single software switch.
C. The hypervisor can virtual physical components including CPU, memory, and storage.
D. Virtualized servers run most efficiently when they are physically connected to a switch that is separate from the hypervisor.
Answer: C

CCNP and CCIE Enterprise Core 350-401 ENCOR Exam Questions

350-401 ENCOR exam is a new Cisco Enterprise exam related to CCNP and CCIE Enterprise certifications. if you are looking for preparation of this 350-401 ENCOR exam, we highly suggest you download PassQuestion New CCNP and CCIE Enterprise Core 350-401 ENCOR Exam Questions to study, because you will find all the questions you are sitting in the real are from our dumps, we ensure that you can pass 350-401 Implementing Cisco Enterprise Network Core Technologies v1.0 exam successfully. 

350-401 ENCOR Exam Description - Implementing Cisco Enterprise Network Core Technologies v1.0

The Implementing Cisco Enterprise Network Core Technologies v1.0 (ENCOR 350-401) exam is a 120-minute exam associated with the CCNP® Enterprise, CCIE® Enterprise Infrastructure, CCIE Enterprise Wireless, and Cisco Certified Specialist – Enterprise Core certifications. This exam tests a candidate's knowledge of implementing core enterprise network technologies including dual stack (IPv4 and IPv6) architecture, virtualization, infrastructure, network assurance, security and automation.

New CCNP and CCIE Enterprise Core Exam 350-401 ENCOR Objectives

This exam tests your knowledge and skills related to implementing core enterprise network technologies, including:
Dual stack (IPv4 and IPv6) architecture
Virtualization
Infrastructure
Network assurance
Security
Automation

Practice Online 350-401 ENCOR Free Questions Which Are Part Of PassQuestion 350-401 ENCOR Real Exam Questions

1.What is a benefit of data modeling languages like YANG?
A. They enable programmers to change or write their own application within the device operating system.
B. They create more secure and efficient SNMP OIDs.
C. They make the CLI simpler and more efficient.
D. They provide a standardized data structure, which results in configuration scalability and consistency.
Answer: C

2.A customer has several small branches and wants to deploy a WI-FI solution with local management using CAPWAP.
Which deployment model meets this requirement?
A. Autonomous
B. Mobility express
C. SD-Access wireless
D. Local mode
Answer: B

3.Which statement about agent-based versus agentless configuration management tools is true?
A. Agentless tools require no messaging systems between master and slaves.
B. Agentless tools use proxy nodes to interface with slave nodes.
C. Agent-based tools do not require a high-level language interpreter such as Python or Ruby on slave nodes.
D. Agent-based tools do not require installation of additional software packages on the slave nodes.
Answer: C

4.On which protocol or technology is the fabric data plane based in Cisco SD-Access fabric?
A. LISP
B. IS-IS
C. Cisco TrustSec
D. VXLAN
Answer: D

5.When using TLS for syslog, which configuration allows for secure and reliable transportation of messages to its default port?
A. logging host 10.2.3.4 vrf mgmt transport tcp port 6514
B. logging host 10.2.3.4 vrf mgmt transport udp port 6514
C. logging host 10.2.3.4 vrf mgmt transport tcp port 514
D. logging host 10.2.3.4 vrf mgmt transport udp port 514
Answer: A

6.A client device fails to see the enterprise SSID, but other devices are connected to it.
What is the cause of this issue?
A. The hidden SSID was not manually configured on the client.
B. The broadcast SSID was not manually configured on the client.
C. The client has incorrect credentials stored for the configured hidden SSID.
D. The client has incorrect credentials stored for the configured broadcast SSID.
Answer: A

Requirements For CCNP Enterprise, CCIE Enterprise Infrastructure and CCIE Enterprise Wireless Certifications

1.To earn CCNP Enterprise, you pass two exams: a core exam and an enterprise concentration exam of your choice. And every exam in the CCNP Enterprise program earns an individual Specialist certification, so you get recognized for your accomplishments along the way.

The core exam focuses on your knowledge of enterprise infrastructure including dual-stack (IPv4 and IPv6) architecture, virtualization, infrastructure, network assurance, security, and automation. The core exam is also the qualifying exam for CCIE Enterprise Infrastructure and CCIE Enterprise Wireless certifications. Passing this exam helps toward earning any or all of these certifications.
Concentration exams focus on emerging and industry-specific topics such as network design, SD-WAN, wireless, and automation. You can prepare for concentration exams by taking corresponding Cisco training courses.

2.Between February 24, 2020 and April 27, 2020, to earn CCIE Enterprise Infrastructure, you must pass the 350-401 ENCOR exam and the CCIE Routing and Switching lab exam. As of April 27, 2020, the CCIE Enterprise Infrastructure v1.0 lab exam will go live.

3.Between February 24, 2020 and April 27, 2020, to earn CCIE Enterprise Wireless, you must pass the 350-401 ENCOR exam and the CCIE Wireless v3.1 lab exam. As of April 27, 2020, the CCIE Enterprise Wireless v1.0 lab exam will go live.